Determination of polymyxin B in dried blood spots using LC-MS/MS for therapeutic drug monitoring.

Polymyxin B, a last line antibiotic for extensively drug resistant gram-negative bacteria, therapeutic drug monitoring (TDM) is recommended to minimize its nephrotoxicity and improve efficacy. In the present study, we developed a novel quantification method of polymyxin B in dried blood spots (DBS) using liquid chromatography coupled with mass spectrometry (LC-MS/MS), which was performed on a Shimadzu Prominence HPLC system coupled with a 4500 triple quadrupole mass spectrometer. An aliquot of 50 µL whole blood sample was spotted on Whatman 903® paper cards. Each DBS sample was cut off into a 6 mm diameter disc and extracted by acetonitrile in water (30% in volume, containing 6% formic acid, v/v). Both intra and inter-batch accuracy was in the range of 92.6%-111.0% for polymyxin B1 and 91.5%-111.5% for polymyxin B2. The precision was in the range of 5.2%-12.2% for polymyxin B1 and 4.9%-13.1% for polymyxin B2. The matrix effects for polymyxin B1 and polymyxin B2 at low, medium and high concentrations were ranged from 102.2%-107.9% and 99.8%-106.2%, respectively. The extraction recoveries were >85.4%. Stability results showed that DBS cards can be transported at room temperature within 2 days and was stable in sealed plastic bags for 38 days at -70 °C. Bland-Altman analysis demonstrated that concentrations of polymyxin B measured in DBS and plasma methods were in moderate agreement with 95.1% samples within the 95% confidence interval of limits of agreement. The DBS method was successfully applied in clinic for TDM of polymyxin B, which can be an alternative approach in clinic.

Selective Spectrofluorimetric Protocol for Determination of Commonly Used Gram-negative Bactericidal Drug in Combined Pharmaceutical Dosage Forms and Human Plasma.

Gram-negative bacteria cause infections such as skin infection, meningitis, and pneumonia in human being. Gram-negative bacteria are highly resistant to most availaible bactericidal drugs. One of the most commonly used Gram-negative bactericidal drug is Polymyxin B sulfate (PMS). In addition, it is used in cases of highly resistant Gram-negative bacterial infections. The widespread of PMS necessitate the development of an exceedingly sensitive and selective fluorimetric assay for its determination in pure form, different pharmaceutical dosage forms, and human plasma. The presented method is used to determine PMS in their dosage form (vials) and combined pharmaceutical formulations (skin and eye ointments) with a high degree of accuracy and selectivity. The described procedure relies on the structure of a derivative of a high degree of fluorescence called dihydropyridine, via the condensation of the amino moiety of PMS with two equivalents of acetylacetone in the presence of formaldehyde and Teorell buffer (pH = 3). The fluorescent product was measured at 471 nm (λex = 402 nm). The linearity ranged from 100-3000 ng mL-1 of PMS with an excellent r2 of 0.9998. LOD and LOQ were 27.16 ng mL-1 and 82.30 ng mL-1, respectively. Owing to the developed method's high selectivity, it was successfully utilized for assay of PMS, in the ointment, in the presence of oxytetracycline as an active ingredient. Furthermore, the procedure applied for the estimation of parenteral PMS in human plasma with very good mean recovery 97.42 ± 1.46.

Estimation of the area under concentration-time curve of polymyxin B based on limited sampling concentrations in Chinese patients with severe pneumonia.

AIMS: The efficacy and toxicity of polymyxin B (PB) are closely related to its pharmacokinetic/pharmacodynamic (PK/PD) index area under the concentration-time curve (AUC) to minimum inhibitory concentration (MIC) ratio. The purpose of this study was to obtain PK data for PB in Chinese severe pneumonia patients and establish appropriate blood sampling time points for the PB therapeutic drug monitoring (TDM). SUBJECT AND METHOD: After treatment with at least four doses of PB (50 IU, q12h), the blood samples were collected immediately after the end of infusion (C0) and 1.5, 2, 4, 6, 8, and 12 h (C1.5, C2, C4, C6, C8, C12) after PB administration. The PB blood plasma concentrations were determined using an ultra-performance liquid chromatography-tandem mass spectrometer (UPLC-MS/MS). All 42 patients were randomly divided into modeling (n = 24) and validation (n = 18) groups. The relationship between AUCss,24h and PB plasma concentration at each time point in modeling group was analyzed using limited sampling strategy and a PK method based on one-compartment with correction model. RESULTS: C6 scheme was found to provide the most accurate prediction of AUCss,24h values (r2 = 0.984) with the target value of 1.9-4.2 µg/ml at steady state to reach the 50-100 µg h/ml criteria of AUCss,24h. C0 with target value of 1.0-2.8 µg/ml can be considered an alternative sampling scheme (r2 = 0.900) but prediction deviation may exist. C0 and Cmax sampling scheme also demonstrated good predicting ability of AUC values using PK model. CONCLUSION: This study provides a clear plan for the implementation of TDM of PB, which is useful for optimizing the dosing regimen and individualizing treatment in severe pneumonia patients.

Therapeutic drug monitoring of polymyxin B by LC-MS/MS in plasma and urine.

Background: A robust and rapid method for therapeutic drug monitoring (TDM) is urgently needed for polymyxin B, which is a last-line antibiotic for multidrug-resistant gram-negative bacteria infection. Methodology: A 3-min run of LC-MS/MS method was established to determine the main components of polymyxin B (polymyxin B1 and B2) in human plasma or urine. Solid-phase extraction was employed to eliminate the matrix effect from complicated samples from patients. Results: The calibration range was 0.050-5.00 and 0.0110-0.549 µg/ml for polymyxin B1 and B2, respectively, in plasma and urine. The precision and accuracy of quality controls, matrix effect, extraction recovery and stability were all validated and satisfied with the ICH requirements. The method was successfully applied to a pharmacokinetic study in healthy subjects and TDM in patients. Conclusion: The rapid LC-MS/MS method was validated for polymyxin B in plasma and urine, and robust for TDM.

Lactate predicts the 28-day survival rate in patients with septic shock treated with the combination of PMX-DHP and rTM.

We have previously reported that combination therapy with polymyxin-B direct hemoperfusion (PMX-DHP) and recombinant thrombomodulin (rTM) is effective in patients with septic shock accompanied by disseminated intravascular coagulation (DIC). Two previous studies reporting the favorable effect of early initiation of PMX-DHP for septic shock did not focus on the combination therapy of PMX-DHP and rTM. This retrospective study included 47 consecutive patients who underwent the combination therapy of PMX-DHP and rTM for septic shock with DIC from August 2011 to August 2016. Main exposure was early or late initiation of PMX-DHP. PMX-DHP initiated within 12 hours after catecholamine administration was designated as early group (N = 25) and later than 12 hours as late group (N = 22). Main outcome was 28-day survival rate. The patient characteristics were age median 73 (IQR 68-78) years, 26 men (55%), APACHE II score 32.7 ± 7.7 and lactate 26.0 (18.0-41.0) mg/dL. The 28-day survival rate after PMX-DHP initiation was 76.6% and was not significantly different in the two groups. In the early group, APACHE II score was lower (P = .02), and lactate was higher (P = .005) than in the late group. Lactate was the only predictor of 28-day mortality [odds ratio (95%CI) per 1 mg/dL, 1.08 (1.03-1.19); P = .037] in multivariate logistic regression analysis adjusted with age, sex, APACHE II score, lactate and timing of PMX-DHP initiation. Late PMX-DHP initiation did not lead to statistically worse 28-day survival rate in this combination therapy. The combination therapy of PMX-DHP and rTM may improve the therapeutic effect of PMX-DHP and modify the effect of early PMX-DHP on the prognosis. Lactate may be an appropriate indicator rather than time after catecholamine administration if we discuss when to start PMX-DHP in this combination therapy.

Nephrotoxicity Associated with Intravenous Polymyxin B Once- versus Twice-Daily Dosing Regimen.

Nephrotoxicity is a known adverse effect of polymyxin B (PMB). Animal data suggest that once-daily dosing may reduce the rate and delay the onset of acute kidney injury (AKI). In a multicenter retrospective study, we evaluated adult patients with a creatinine clearance (CrCl) of ≥30 ml/min who received ≥48 h of PMB therapy. The primary endpoint was the difference in rate of AKI comparing once- and twice-daily PMB dosing. The secondary endpoints included the time to AKI and the recovery of renal function. Of 273 eligible patients, 100 from each group were matched on the basis of propensity scores. In the matched groups, nephrotoxicity, defined according to risk, injury, failure, loss, and end-stage renal disease (RIFLE) criteria, was more frequent with once- than with twice-daily dosing (47% versus 17%, respectively; P = 0.0005). After adjusting for residual differences by multivariate conditional logistic regression, once-daily dosing was more likely to result in nephrotoxicity (adjusted odds ratio, 2.5; 95% confidence interval [CI], 1.413 to 4.541; P = 0.002). Among 64 patients who developed AKI, the median onsets were similar between the groups (7 days with once versus 6 days with twice-daily dosing, P = 0.095). Of 37 patients who had their serum creatinine evaluated subsequently, 29/37 (78%) had recovery of renal function. No patient required renal replacement therapy. Our findings suggest that AKI is significantly more common with PMB once daily than with twice-daily dosing with no difference in time to AKI. A prospective randomized study is warranted to validate these results.

Population Pharmacokinetics of Polymyxin B.

Polymyxin B is used as a last treatment resort for multidrug-resistant Gram-negative bacterial infections. The objectives of this study were to examine the population pharmacokinetics of polymyxin B and investigate factor(s) influencing pharmacokinetic variability. Four serial blood samples each were collected from 35 adult patients at steady state. The concentrations of individual polymyxin B components were analyzed using a validated liquid chromatography / tandem mass spectrometry assay and combined to derive total concentrations. A maximum likelihood expectation maximization approach was used to fit the data. Various demographic variables were investigated as potential covariates for clearance and volume of distribution (Vd ) using linear regression analysis. A one-compartment model fit to the data satisfactorily (r2 = 0.96). The best-fit mean ± SD for clearance and Vd were 2.5 ± 1.1 L/h and 34.3 ± 16.4 L, respectively. Creatinine clearance was found to be a statistically significant covariate of clearance, but the magnitude was deemed clinically insignificant.

New Polymyxin B Dosing Strategies To Fortify Old Allies in the War against KPC-2-Producing Klebsiella pneumoniae.

Pharmacodynamics of a polymyxin B, meropenem, and rifampin triple combination were examined against Klebsiella pneumoniae carbapenemase-producing Klebsiella pneumoniae (KPC-Kp) ST258. In time-kill experiments against three KPC-Kp isolates, triple combination generated 8.14, 8.19, and 8.29 log10 CFU/ml reductions within 24 h. In the hollow-fiber infection model, the triple combination caused maximal killing of 5.16 log10 CFU/ml at 78 h and the time required for regrowth was more than doubled versus the 2-drug combinations. Remarkably, combinations with a high single-dose polymyxin B burst plus rifampin preserved KPC-Kp polymyxin susceptibility (MIC240 h = 0.5 mg/liter) versus the same combination with traditionally dosed polymyxin B, where resistance was amplified (MIC240 h = 32 mg/liter).

High-Dose Ampicillin-Sulbactam Combinations Combat Polymyxin-Resistant Acinetobacter baumannii in a Hollow-Fiber Infection Model.

Acinetobacter baumannii is emerging with resistance to polymyxins. In 24-h time-kill experiments, high-dose ampicillin-sulbactam in combination with meropenem and polymyxin B achieved additivity or synergy against 108 CFU/ml of two clinical A. baumannii isolates resistant to all three drugs (maximum reductions, 1.6 and 3.1 logs). In a 14-day hollow-fiber infection model, high-dose ampicillin-sulbactam (8/4 g every 8 h, respectively) in combination with meropenem (2 g every 8 h) and polymyxin B (1.43 mg/kg of body weight every 12 h with loading dose) resulted in rapid (96 h) eradication of A. baumannii.

Role of Renal Drug Exposure in Polymyxin B-Induced Nephrotoxicity.

Despite dose-limiting nephrotoxic potentials, polymyxin B has reemerged as the last line of therapy against multidrug-resistant Gram-negative bacterial infections. However, the handling of polymyxin B by the kidneys is still not thoroughly understood. The objectives of this study were to evaluate the impact of renal polymyxin B exposure on nephrotoxicity and to explore the role of megalin in renal drug accumulation. Sprague-Dawley rats (225 to 250 g) were divided into three dosing groups, and polymyxin B was administered (5 mg/kg, 10 mg/kg, and 20 mg/kg) subcutaneously once daily. The onset of nephrotoxicity over 7 days and renal drug concentrations 24 h after the first dose were assessed. The effects of sodium maleate (400 mg/kg intraperitoneally) on megalin homeostasis were evaluated by determining the urinary megalin concentration and electron microscopic study of renal tissue. The serum/renal pharmacokinetics of polymyxin B were assessed in megalin-shedding rats. The onset of nephrotoxicity was correlated with the daily dose of polymyxin B. Renal polymyxin B concentrations were found to be 3.6 ± 0.4 µg/g, 9.9 ± 1.5 µg/g, and 21.7 ± 4.8 µg/g in the 5-mg/kg, 10-mg/kg, and 20-mg/kg dosing groups, respectively. In megalin-shedding rats, the serum pharmacokinetics of polymyxin B remained unchanged, but the renal exposure was attenuated by 40% compared to that of control rats. The onset of polymyxin B-induced nephrotoxicity is correlated with the renal drug exposure. In addition, megalin appears to play a pivotal role in the renal accumulation of polymyxin B, which might contribute to nephrotoxicity.

Characterization of Polymyxin B Biodistribution and Disposition in an Animal Model.

Despite dose-limiting nephrotoxicity concerns, polymyxin B has resurged as the treatment of last resort for multidrug-resistant Gram-negative bacterial infections. However, the pharmacokinetic, pharmacodynamic, and nephrotoxic properties of polymyxin B still are not thoroughly understood. The objective of this study was to provide additional insights into the overall biodistribution and disposition of polymyxin B in an animal model. Sprague-Dawley rats were dosed with intravenous polymyxin B (3 mg/kg of body weight). Drug concentrations in the serum, urine, bile, and tissue (brain, heart, lungs, liver, spleen, kidneys, and skeletal muscle) samples over time were assayed by a validated methodology. Among all the organs evaluated, polymyxin B distribution was highest in the kidneys. The mean renal tissue/serum polymyxin B concentration ratios were 7.45 (95% confidence interval [CI], 4.63 to 10.27) at 3 h and 19.62 (95% CI, 5.02 to 34.22) at 6 h postdose. Intrarenal drug distribution was examined by immunostaining. Using a ratiometric analysis, proximal tubular cells showed the highest accumulation of polymyxin B (Mander's overlap coefficient, 0.998) among all cell types evaluated. Less than 5% of the administered dose was recovered in urine over 48 h, but all 4 major polymyxin B components were detected in the bile over 4 h. These findings corroborate previous results that polymyxin B is highly accumulated in the kidneys, but the elimination likely is via a nonrenal route. Biliary excretion could be one of the routes of polymyxin B elimination, and this should be further explored. The elucidation of mechanism(s) of drug uptake in proximal tubular cells is ongoing.

Analytical and functional determination of polymyxin B protein binding in serum.

To enhance our understanding of the pharmacological properties of polymyxin B, serum protein binding for polymyxin B1, B2, and B3 and for isoleucine-polymyxin B1 was evaluated. Using equilibrium dialysis and ultrafiltration, comparable protein binding was found in all 4 components of polymyxin B (92% to 99%). Protein binding in human serum was further assessed using a functional assay, the results of which were in general agreement with previous findings (approximately 90%).

Screening and Optimization of the Reaction of Polymyxin B Sulphate with NBD-Cl for the Synchronous Spectrofluorimetric Determination of Polymyxin B Sulphate in Human Plasma.

An accurate and sensitive synchronous spectrofluorimetric method has been developed for the determination of Polymyxin B sulphate (Poly B) in human plasma. The method is based on the reaction of non-fluorescent Poly B with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in borate buffer of pH 7 producing a yellow color with maximum relative fluorescence at 440 nm using a constant wavelength difference Δλ = 80 nm. Reaction conditions and other analytical parameters were studied and optimized using factorial design. Three level factorial designs have been employed for the screening, optimization of all experimental variables and determination of their interactions on the final product formation. The variables under investigation were: pH of borate buffer, volume of buffer, volume of NBD-Cl, temperature, time of heating and volume of sulfuric acid. A linear plot between relative fluorescence and concentration was obtained over the concentration range 100.00-1200.00 ng mL(-1). The limit of detection (LOD) and limit of quantification (LOQ) were found to be 10.31 and 31.24 ng mL(-1), respectively. The proposed method was validated according to ICH guidelines and successfully applied for the determination of Poly B in human plasma, where satisfactory results were obtained. The results obtained were statistically compared with those of a published method, where no significant difference was observed.

Direct determination of polymyxin B sulfate using resonance Rayleigh scattering and resonance non-linear scattering methods with hexatungstate.

At pH 1.3-1.6, tungstate WO4(2-) , can be converted to hexatungstate W6 O19(2-) , which can react with positively charged polymyxin B sulfate (PMB) to result in enhancement of resonance Rayleigh scattering (RRS) and resonance non-linear scattering, including second order scattering and frequency doubling scattering. Linear relationships can be established between enhanced scattering intensity and PMB concentration. The detection limits (3σ) were 5.5 ng/mL (RRS), 10.1 ng/mL (second order scattering) and 34.6 ng/mL (frequency doubling scattering). The optimum reaction conditions, influencing factors and related analytical properties were tested. The interaction mechanism was investigated via absorption spectrum, circular dichroism spectra and atomic force microscopy imaging. The basis of scattering enhancement is discussed. PMB in eardrops, human serum and urine, were quantified satisfactorily by RRS.

Population pharmacokinetics of intravenous polymyxin B in critically ill patients: implications for selection of dosage regimens.

BACKGROUND: Polymyxin B is a last-line therapy for multidrug-resistant gram-negative bacteria. There is a dearth of pharmacokinetic data to guide dosing in critically ill patients. METHODS: Twenty-four critically ill patients were enrolled and blood/urine samples were collected over a dosing interval at steady state. Polymyxin B concentrations were measured by liquid chromatography-tandem mass spectrometry. Population pharmacokinetic analysis and Monte Carlo simulations were conducted. RESULTS: Twenty-four patients aged 21-87 years received intravenous polymyxin B (0.45-3.38 mg/kg/day). Two patients were on continuous hemodialysis, and creatinine clearance in the other patients was 10-143 mL/min. Even with very diverse demographics, the total body clearance of polymyxin B when scaled by total body weight (population mean, 0.0276 L/hour/kg) showed remarkably low interindividual variability (32.4% coefficient of variation). Polymyxin B was predominantly nonrenally cleared with median urinary recovery of 4.04%. Polymyxin B total body clearance did not show any relationship with creatinine clearance (r(2) = 0.008), APACHE II score, or age. Median unbound fraction in plasma was 0.42. Monte Carlo simulations revealed the importance of initiating therapeutic regimens with a loading dose. CONCLUSIONS: Our study showed that doses of intravenous polymyxin B are best scaled by total body weight. Importantly, dosage selection of this drug should not be based on renal function.

Mechanisms of polymyxin B endotoxin removal from extracorporeal blood flow: molecular interactions.

The outer leaflet of Gram-negative bacteria membrane contains a great amount of lipopolysaccharides, also known as endotoxins, which play a central role in the pathogenesis of septic shock. It has been demonstrated that the polymyxin B (PMB) molecule has both antibacterial and antiendotoxin capabilities; in fact, it is able to compromise the bacterial outer membrane and bind lipopolysaccharides, thereby neutralizing its toxic effects. Extracorporeal hemoperfusion treatments based on cartridges containing PMB-immobilized fibers (Toraymyxin PMX-F; Toray Industries, Tokyo, Japan) are used to remove endotoxins circulating in the blood flow. In this study, we focused on the characterization of the interactions occurring in the formation of the PMB-endotoxin complex at the molecular level. In particular, the molecular mechanics approach was used to evaluate the interaction energy and eventually the interaction force between the two molecules. PMB was faced with five molecular portions of lipopolysaccharides differing in their structure. The interaction energy occurring for each molecular complex was calculated at different intermolecular distances and the binding forces were estimated by fitting interaction energy data. Results show that the short-range interactions between PMB and endotoxins are mediated mainly by hydrophobic forces, while in the long term, the complex formation is driven by ionic forces only. Maximum binding forces calculated via molecular mechanics for the PMB-endotoxin complex are in the range of 1.39-3.79 nN. Understanding the interaction mechanism of the single molecular complex is useful both in order to figure out the molecular features of such interaction and to perform higher scale level analysis, where such nanoscale detail is impractical but could be used to account for molecular behavior at a coarse level of discretization.

Mechanisms of polymyxin B endotoxin removal from extracorporeal blood flow: hydrodynamics of sorption.

The removal of blood endotoxins with the Toraymyxin extracorporeal sorption device exploits the capability of immobilized polymyxin B (PMB) to bind endotoxins stably with a high specificity. Although adsorption is a molecular-scale mechanism, it involves hydrodynamic phenomena in the whole range from the macroscopic down to the supramolecular scales. In this paper we summarize our experience with a computational, multiscale investigation of this device's hydrodynamic functionality. 3D computational fluid dynamics models were developed for the upper-scale studies. The flow behavior in the sorbent material was either modeled as a homogeneous Darcy's flow (macroscale study), or described as the flow through realistic geometrical models of its knitted fibers (mesoscale study). In the microscale study, simplified 2D models were used to track the motion of modeled endotoxin particles subjected to the competition of flow drag and molecular attraction by the fiber-grafted PMB. The results at each scale level supplied worst-case input data for the subsequent study. The macroscale results supplied the peak velocity of the flow field that develops in the sorbent. This was used in the mesoscale analysis, yielding a realistic range for the shear stresses in the fluid next to the fiber surface. With wall shear stresses in this range, endotoxin particle tracking was studied both in the vicinity of a single immobilized PMB molecule, and in the presence of a layer of PMB molecules evenly distributed at the fiber surface. Results showed that the capability to seize endotoxin molecules extends at least at a distance of 10-20 nm from the surface, which is one order of magnitude greater than the stable intermolecular bond characteristic distance. We conclude that a multiscale approach has the power to provide a comprehensive understanding, shedding light both upon the physics involved at each scale level and the mutual interactions of phenomena occurring at different scales.

Endotoxin-neutralizing activity of polymyxin B in blood after IV administration in horses.

OBJECTIVES: To measure serum polymyxin B concentration after single and repeated IV infusions in horses. ANIMALS: 5 healthy horses. PROCEDURES: In study 1, 1 mg (6,000 U) of polymyxin B/kg was given IV and blood samples were collected for 24 hours. In study 2, 1 mg of polymyxin B/kg was given IV every 8 hours for 5 treatments and blood samples were collected until 24 hours after the last dose. Polymyxin B concentration was measured as the ability to suppress nitrite production by murine macrophages stimulated with lipopolysaccharide and interferon-alpha. Urine was collected prior to the first drug infusion and 24 hours after the fifth drug infusion for determination of urinary gamma-glutamyl transferase (GGT)-to-creatinine ratios. RESULTS: In study 1, mean +/- SEM maximal serum polymyxin B concentration was 2.93 +/- 0.38 microg/mL. Polymyxin B was undetectable 18 hours after infusion. In study 2, maximal polymyxin B concentrations after the first and fifth doses were 2.98 +/- 0.81 microg/mL and 1.91 +/- 0.50 microg/mL, respectively. Mean trough concentration for all doses was 0.22 +/- 0.01 microg/mL. A significant effect of repeated administration on peak and trough serum concentration was not detected. Urine GGT-to-creatinine ratios were not affected by polymyxin B administration. CONCLUSIONS AND CLINICAL RELEVANCE: Polymyxin B given as multiple infusions to healthy horses by use of this protocol did not accumulate in the vascular compartment and appeared safe. Results support repeated IV use of 1 mg of polymyxin B/kg at 8-hour intervals as treatment for endotoxemia.

Low-dose intramuscular polymyxin B improves survival of septic rats.

UNLABELLED: Polymyxin B (PLB) is a cationic antibiotic that also stoichiometrically neutralizes the lipid A moiety of endotoxin. We examined effects of a small dose of PLB on the mortality of rats with cecal ligation and puncture, on LPS-stimulated nitric oxide (NO) production, and on tumor necrosis factor alpha (TNF alpha) production by isolated rat Kupffer cells. MATERIALS AND METHODS: In vivo studies: Cecal ligation and puncture (CLP) was performed under anesthesia in 28 rats. One hour after CLP, either 600 U/kg of PLB or saline was administered intramuscularly every 6 h (PLB group: n = 12; control group: n = 16). Plasma endotoxin was measured at 3 and 24 h after the CLP by the Endospecy test. This was compared with survival. IN VITRO STUDIES: Kupffer cells were isolated from the normal rat liver. The cells were incubated with LPS or LPS + PLB. After 24 h, NO and TNF alpha content were measured using the Griess and ELISA methods, respectively. RESULTS: Low dose PLB significantly decreased the endotoxin levels at both 3 and 24 h (5.5 +/- 2.1 pg/mL vs. 32.8 +/- 3.6 at 3 h; 26.1 +/- 6.1 vs. 49.1 +/- 5.6 at 24 h (p < .05) after CLP. PLB significantly improved survival of CLP rats (68.8% in the control group vs. 100% in the PLB treated group on 3 days after CLP, p < .001). PLB also attenuated NO and TNF alpha production from the Kupffer cells. CONCLUSION: Intramuscular PLB administered in low doses may improve the mortality of sepsis.